Product description

Hollow Shaft Position Indicators OP7 Features:

This is a 5-digit indicator to adjust and directly read a motion (or an angle) obtained by a drive shaft rotation. Perfectly interchangeable with indicator OP6 but smaller and closer.

The total height of indicator OP7 with spacer flange or block flange is the same of OP6.

The coupling of numbers with a rubber-joint allows, especially in high ratios, a bigger flowability and manoeuvre speed.

  • Shock-proof self-extinguishing technopolymer case. Protection IP64. Max. temperature 80°C.
  • Reading with 18° inclined or frontal view. Lens to improve the reading: digit height 7 mm.
  • 5 digits counter (standard red digit indicates decimals; on request 2 red digits for hundredths or 5 black digits) and a digit with hundredth divisions. Readings until 99999.
  • On request special ratios and measures in Inch.
  • Standard shaft hole¸20 (OP7) or .25 hole (OP7F25). Other holes smaller than 20 with a reducing bush.
  • As option (c) security dowel 10,5/12 mm.
  • Model IN with inox metallic parts.
  • Colours: orange RAL 2004, black RAL 9005, red RAL 3000, grey RAL 7004.
  • Available attachments: shaft block flange, polycarbonate spacer flange, anodizid aluminium movement knob

Overall Dimensions

Fiama op7 overall dimensions
  • 1. Lock pin 10,5/12/12
  • 2. Lock pin
  • 3. Fixing screw
  • 4. 40x2 embedding
  • 5. 2,5x12 fixing holes
  • 6. Dust seal

Mounting Position

Fiama op7 mounting position

Assembling

Introduce the indicator through the hollow shaft and set the lock pin into the ¸6 arranged hole. Set the instrument on the inner (zero) value and block the fixing screw.