Product description

Hollow Shaft Position Indicators OP10 Features:

This is a digital indicator with two 5-digit counters to adjust and directly read a motion obtained by a drive shaft rotation.

  • Shock-proof, self-extinguishing technopolymer case. Protection IP54. Temperature max.: 70°C.
  • Reading with 62° inclination.
  • Two 5-digit counters (standard red digit indicates decimals; on request 2 red digits for hundredths or 5 black digits). Reading until 99999. Digit height: 5,5 mm.
  • Standard shaft hole: 20 H7. Smaller holes with a reducing bush.
  • Counters models: increase-increase(DX-DX), decrease-decrease (SX-SX), increase-decrease (DX: referred to the higher counter 1), decrease-increase (SX: referred to the higher counter 1).
  • OP10: 2 counters, on request OP10 with 1 zero-set AZZ, with 2 zero-set 2AZZ.
  • Colours: orange RAL 2004, black RAL 9005.

Overall Dimensions

Fiama op10 overall dimensions
  • 1. Counter 1
  • 2. Counter 2
  • 3. Positioning push button
  • 4. Lock pin
  • 5. 40x15 embedding
  • 6. Fixing screw
  • 7. 2 2,5x10 fixing holes
  • 8. Dust seal

Mounting Position

Fiama op10 mounting position

Assembling Position

The increasing direction of counters 1 and 2 has the point of reference always in counter 1.

For example: SX shows that counter 1 turns anti-clockwise and counter 2 turns clockwise; DX-DX shows that both counters turns clockwise.

Assembling

Introduce the indicator through the hollow shaft and set the lock pin into the .6 arranged hole. Set the instrument on the inner (zero) value and block the fixing screw.Introduce the indicator through the hollow shaft and set the lock pin into the .6 arranged hole. Set the instrument on the inner (zero) value and block the fixing screw.