Worm geared motors

Single and double worm gear reducer; per-stage with single worm gear reducer.

• 11 sizes with power from 0.06 to 15 kW.
• Patented case with modern design.
• Reduction ratios between 5 and 100.
• Torque max 1400 Nm and admissible radial loads max 16500 N.
• Cases up to 105 in die-cast aluminium alloy.
• Cases over 110 in G200 grey cast iron.
• Worm wheel: bronze GCu Sn12 (UNI7013-72)
• Ground worm profile ZI (UNI4760).
• Excellent mechanical strength while being especially lightweight
• Load capacity calculated to BS721-83.
• Verified according to Niemann.
• Size 030 and over are painted with Ral 5010 blue epoxy-polyester powder.

In-line helical geared motors

Cast iron H/PH/CH/IH Series
In-line helical gearmotors and gear reducers

• 8 sizes with power from 0.12 to 45 kW and gears with shaved or ground profile.
• Gearing with 1, 2 and 3 reduction stages.
• Reduction ratios between 1,2 and 280.
• Torque max 8000 Nm and admissible radial loads max 55000 N.
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength, particularly suitable to support high axial loads and high reliability.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.

Alluminium HA/CHA/IHA Series
In-line helical gearmotors and gear reducers

• 4 sizes with power from 0.12 to 4,8 kW.
• Gears with shaved or ground profile.
• Gearing with 1, 2 and 3 reduction stages.
• Reduction ratios between 1,3 and 350.
• Torque max 480 Nm and admissible radial loads max 8000 N.
• Cases in die-cast aluminium alloy.
• Excellent mechanical strength while being and particularly lightweight.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.

Helical bevel geared motors

Cast iron B/PB/CB/IB Series
Helical bevel gearmotors and gear reducers

• 5 sizes with power from 0.55 to 45 kW.
• Gears with shaved or ground profile.
• Gearing with 3 reduction stages.
• Gleason spiral bevel gear pairs with run-in profile.
• Reduction ratios between 7,8 and 180.
• Torque max 8000 Nm and admissible radial loads max 65000 N.
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.

Aluminium BA/CBA/IBA Series
Helical bevel gearmotors and gear reducers

• 3 sizes with power from 0.12 to 4,8 kW.
• Gears with shaved or ground profile.
• Gearing with 2 and 3 reduction stages.
• Gleason spiral bevel gear pairs with run-in profile.
• Reduction ratios between 7,6 and 443.
• Torque max 450 Nm and admissible radial loads max 5500 N (hollow shaft) and 10000 N. (solid shaft).
• Cases in die-cast aluminium alloy.
• Excellent mechanical strength while being and particularly lightweight.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.

Parallel shaft mounted geared motor

Cast iron S/PS/CS/IS Series
Parallel shaft mount gearmotor and gear reducer

• 5 sizes with power from 0.12 to 30 kW.
• Gears with shaved or ground profile.
• Gearing with 2 and 3 reduction stages.
• Reduction ratios between 7,3 and 394.
• Torque max 3000 Nm and admissible radial loads max 11200 N (hollow shaft) and 30000 N. (solid shaft).
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.

Mechanical variable speed

Aluminium TXF Series
Speed variators and motovariators

• 3 sizes with power from 0.15 to 2,2 kW with cases in die-cast aluminium alloy.
• Shafts: case hardened and tempered 20MnCr5 steel (UNI8550).
• Internal components: 100Cr6 heat-treated steel.
• Variation range: i=( rpm max/rpm min).
  • i=3,5 (TX005 / 080 engine- TX010/090 engine).
  • i=6 (TX005/71 engine - TX010/80 engine).
  • with differential: i=infinite. 
• Torque value max 12 Nm.
• Silent, vibration-free running.
• High efficiency.
• Bidirectional rotation.
• Control handwhel positionable on either side.
• Number of lost turn with motor 5% max.
• Regulation sensibility: 0,5 rpm.
• All the sizes are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843