Lynx SM DC Controller
The Lynx SM series of DC motor speed controllers are designed for efficient speed control of conventional wound-field and permanent magnet motors in the 0.55 to 7.5 kW range.
The series consists of 3 models each capable of 220/240 volt or 380/440 volt 50/60 Hz supply operation. Control Outputs are fully isolated in both armature and tacho feedback modes.
Key Features
- Surface mount technology
- Dual input voltages link selectable
- Set speed input 0-10V/4-20 mA
- Switch selectable features
- Speed/torque control
- Tacho/AVF scaling
- Status/fault or low speed/zero reference
- Full wave bridge - half controlled
- 20:1 constant torque speed range
- 2% regulation for 100% load change with AVF (0.5% with tacho feedback)
- Overload protection 150% FLC for 10 seconds with trip indication
- Ambient -10º to +40ºC
- Fully isolated electronics
- Dual Input Voltages
- Manufactured in accordance with BS5750/ISO 9002
- Wound field/permanent magnet motor controller
- Speed/Torque Control
- Armature/Tacho feedback scaling
- Current feedback scaling
- Separately adjustable ramps
- 0-10V, 4-20 mA reference
- CSA approved
Rating Table
| Model | Supply 380-440V 1ph 50/60 Hz | Supply 220-240V 1ph 50/60 Hz | ||
|---|---|---|---|---|
| Max Rating kW | Max Rating Amps | Max Rating kW | Max Rating Amps | |
| LYNX 8 | 2.2 | 8.0 | 1.1 | 8.0 |
| LYNX 16 | 4.0 | 16.0 | 2.0 | 16.0 |
| LYNX 30 | 7.5 | 30.0 | 3.75 | 30.0 |
Dimensions
| Model | Width | Height | Depth |
|---|---|---|---|
| Lynx | 255 mm | 92 mm | 150 mm |
